{{results.messages.text}}

Ar-15 - Chaska Classifieds

26
Rifle Length Gas Tube, manufactured from stainless steel. Includes roll pin. Finish: Stainless Steel
{{results.messagesById['http://www.armslist.com/posts/5784317']}}
Pistol Gas Tube, manufactured from stainless steel. Includes roll pin.
{{results.messagesById['http://www.armslist.com/posts/5784304']}}
Machined from forged 7075 T6 aluminum, the assembled upper receiver is precision-machined to M16/M4 specification and features M4 feedramps. This unit comes assembled with both the port door and forward assist hardware. Brand: Aero Precision
{{results.messagesById['http://www.armslist.com/posts/5756254']}}
Anderson Manufacturing AR-15 Charging Handle. Made from 7075-T6 with Type III Hard Coat Anodized Black finish. Standard Latch Profile. Proudly Made in the USA!!
{{results.messagesById['http://www.armslist.com/posts/5762293']}}
The Strike Industries ARCH (AR15 Charging Handle) is an easy to use, ergonomic charging handle. The raised rear lip helps divert harmful gasses, oil, and dirt away from the shooter, while the highly polished, anodized surface allows for clean, smooth function. Manufactured from 7075-T6 aluminum and hardcoat anodized for maximum durability. Check out this product on my website! http://www.battle...
{{results.messagesById['http://www.armslist.com/posts/5762299']}}
The BCMGUNFIGHTER Charging Handle and extended latches feature internal redesigns to direct the force off of the roll pin and into the body of the charging handle during support hand only manipulations. This new design has a built in backstop engineered into the extended latch and into the charging handle. As the latch is opened up, its travel is limited by these flat surface backstops. With th...
{{results.messagesById['http://www.armslist.com/posts/5762318']}}
Mega Arms Cutting edge new design! This design does not require a latch to be pulled to release charging handle. Compatible with any Mil-Spec upper. Made of Hardcoat Anodized 7057-T6 Alluminium with a Black Finish. Made in the USA!! Check out this product on my website! http://www.battlecreekarmory.com/product-p/megach556sl.htm
{{results.messagesById['http://www.armslist.com/posts/5762360']}}
AR-15 low profile gas block. This gas block replaces your existing front sight to provide a simple, low profile design that can be used to mount a free float rail over the top, etc. Gas block Is mounted by the use of two set screws and is .950 Inches long. Manufactured from high quality steel with a Melonite finish. Set screw design for .750" barrels. Brand: Radical Firearms Finish- Melonite Bl...
{{results.messagesById['http://www.armslist.com/posts/5781150']}}
AR-15 low profile gas block. This gas block replaces your existing front sight to provide a simple, low profile design that can be used to mount a free float rail over the top, etc. Gas block Is mounted by the use of two set screws and is .950 Inches long. Manufactured from high quality steel with a Melonite finish. Set screw design for .625" barrels. Brand: Radical Firearms Finish- Melonite Bl...
{{results.messagesById['http://www.armslist.com/posts/5781162']}}
BCA 6.5 Grendel 18" Odin Works Complete Upper w/ 12" Keymod Rail, BCG & CH: This upper comes with a Odin Works 18" Stainless Steeel 1:8 twist barrel w/ intermediate gas system. These barrels are guaranteed to be sub moa. The 12" Keymod rail is made by Smith Built. The Bolt Carrier Group is a Odin Works as well and has a Black Nitride coating with 6.5 Grendel logo on the side of bolt. The charge...
{{results.messagesById['http://www.armslist.com/posts/5885856']}}
BCA 6.5 Grendel 16" Complete Upper w/ 12" Keymod Rail, BCG & CH: This upper comes with a Anderson Manufacturing 16" Phosphate 1:8 twist barrel w/ carbine gas system. The 12" Keymod rail is made by Guntech USA.. The Bolt Carrier Group is a Anderson as well and has a black nitride coating. It comes with a standard charge handle. Built with an Anderson Manufacturing upper receiver. We test fire al...
{{results.messagesById['http://www.armslist.com/posts/5885867']}}
BCA .223 Wylde 7.5" SS Upper w/ 7" KeyMod Rail (GTK55): Are you familar with the .223 Wylde?? It is a 5.56 chamber designed to have a tighter tolerance for better accuracy while shooting .223 ammo. It will still shoot both 5.56 & .223 like your standard 5.56 barrel. This upper comes with an 7.5" .223 Wylde stainless steel barrel 1:7 twist w/ pistol gas system. These barrels are 100% made in the...
{{results.messagesById['http://www.armslist.com/posts/5506071']}}
BCA .300 BlkOut 16" Upper w/ 10" Quad Rail (GTQ26): Comes with an 16" mag phos barrel 1:8 twist w/ pistol gas system. These barrels are made by Anderson Manufacturing and have been very accurate. The 10" quad rail is from Gun Tech USA. Built with an Anderson upper receiver. We test fire all of our uppers to assure proper function and headspace. Not to mention we stand behind the uppers. So if y...
{{results.messagesById['http://www.armslist.com/posts/5506217']}}
BCA 5.56MM 16" Upper w/ 12" Quad Rail (GTQ56): Comes with an 16" mag phos barrel 1:8 twist w/ carbine gas system. These barrels are made by Anderson Manufacturing and have been very accurate. The 12" quad rail is from Gun Tech USA. Built with an Anderson upper receiver. We test fire all of our uppers to assure proper function and headspace. Not to mention we stand behind the uppers. So if you h...
{{results.messagesById['http://www.armslist.com/posts/5506235']}}
BCA .300 BLKOUT 16" Upper w/ 10" KeyMod Rail (GTK81): Comes with an 16" mag phos barrel 1:8 twist w/ pistol gas system. These barrels are made by Anderson Manufacturing and have been very accurate. The 10"keymod rail is from Gun Tech USA. Built with an Anderson upper receiver. We test fire all of our uppers to assure proper function and headspace. Not to mention we stand behind the uppers. So i...
{{results.messagesById['http://www.armslist.com/posts/5506271']}}
AR-15 low profile gas block. This gas block replaces your existing front sight to provide a simple, low profile design that can be used to mount a free float rail over the top, etc. Gas block Is mounted by the use of two set screws and is .950 Inches long. Manufactured from high quality steel with a Melonite finish. Set screw design for .936" barrels. Finish- Melonite Black Inside Diameter- .93...
{{results.messagesById['http://www.armslist.com/posts/5781170']}}
Standard A2 style flash hider. Threaded 1/2x28 with black oxide finish. Includes Crush Washer. Made in the USA!! Caliber / Gauge - 5.56 NATO Finish - Black Oxide Material - 4140 Chrome Moly Steel Thread Pattern - 1/2 x 28 Type - Flash Hider Suppressor Mount - A2 Mount Dimensions - 1.75" L x 0.875" W Check out this product on my website! http://www.battlecreekarmory.com/product-p/mda2cw556.htm
{{results.messagesById['http://www.armslist.com/posts/5783872']}}
Triple-port Muzzle Device and Collar Jam Nut. Designed in house to precisely compliment the platform, their Nitride Heat Treated Muzzle Brake controls muzzle impulse for ultimate accuracy and an unbelievably soft recoil. Comes complete with a Nitride Heat Treated Collar and five (5) strike prongs. Brand - Patriot Ordnance Factory, Inc Caliber / Gauge - .308 Win Finish - Black Nitride Material -...
{{results.messagesById['http://www.armslist.com/posts/5783881']}}
The VG6 EPSILON 556 is our highest performing tactical muzzle device. The EPSILON 556 is a younger sibling the GAMMA series muzzle brake, but with an attitude that matches its larger size. Designed for the discriminating shooter and professional end-users, VG6 Precision's EPSILON 556 Tactical Brake is brings you the best recoil mitigation the industry has to offer. This is a true combination mu...
{{results.messagesById['http://www.armslist.com/posts/5783888']}}
Carbine Length Gas Tube, manufactured from stainless steel. Includes roll pin.
{{results.messagesById['http://www.armslist.com/posts/5784287']}}
Post New Ad